Skip to content

Disable the Developer Mode Extensions Warning in Microsoft Edge

  • Author: Lena Vogt 
  • Updated:

Microsoft Edge can show a “Turn off developer mode extensions” warning after you load an unpacked extension or start the browser with developer mode enabled.

You can keep developer mode for testing, turn it off when you are done, or use a Windows policy to control developer mode on a managed PC. The steps below also cover what to check if the popup returns after a restart.

In this guide, I have covered:

Why Edge keeps showing the developer mode extensions warning

You loaded an unpacked extension, and now Edge greets you with the developer mode warning when the browser starts. Edge shows it because developer mode is on, and the browser wants you to know those extensions do not follow the same store controls as regular add-ons.

The popup gives you two choices: Keep and Turn off. Keep dismisses it for the current session. Edge may bring it back later. The Settings page has no simple switch that hides only the warning while leaving every developer mode feature available.

The original report and workaround discussion lives in Microsoft Edge’s developer mode extension warning discussion.

Dismiss the warning while you keep developer mode on

You are still testing an unpacked extension, so developer mode needs to stay on. Dismiss the popup instead of turning the mode off.

  1. Select Keep when the “Turn off developer mode extensions” warning appears.
  2. Continue using the unpacked extension in the same Edge session.
  3. Repeat that choice if Edge displays the warning again after a restart.

You’ll know it worked when the extension stays enabled and Edge still shows developer tools such as Load unpacked. This does not remove the warning permanently. The prompt follows the security state that developer mode creates.

note icon

Choosing Keep does not grant an unpacked extension a security exemption. Only load extensions from a source you trust, and review their code and permissions before testing them.

Turn off developer mode to remove the warning

You have finished testing the unpacked extension and no longer need developer mode. Turning it off returns Edge to its normal extension mode and stops the warning from appearing at startup.

  1. Open edge://extensions in the Edge address bar.
  2. Turn off the Developer mode toggle on the Extensions page.
  3. Check the extension list and confirm that the unpacked extension you no longer need is off.
  4. Close Edge, then open it again.

You’ll know it worked when Edge restarts without the popup and the Developer mode toggle stays off. If you still need the extension, turn developer mode back on and repeat the Load unpacked process when you are ready to test.

If the Extensions page itself feels unfamiliar, our guide to enabling or disabling extensions in Microsoft Edge walks through the same controls.

Control developer mode with an Edge policy on Windows

You are on a managed Windows PC, and the warning needs a consistent fix across the whole device, not a click per session. That is when the Edge policy comes in.

  1. Open regedit with permission to edit the Microsoft Edge policy registry key.
  2. Go to HKEY_LOCAL_MACHINE\\Software\\Policies\\Microsoft\\Edge.
  3. Create a new DWORD (32-bit) Value named DeveloperModeEnabled if it does not already exist.
  4. Set the DeveloperModeEnabled value data to 1.
  5. Select OK in the Edit Value dialog.
  6. Restart Microsoft Edge.

Open edge://policy and confirm that DeveloperModeEnabled appears with the expected status. You’ll know it worked when the policy shows up there and Edge starts without the warning. If Edge is already running when the policy is added, close every Edge window and reopen the browser before you check again.

note icon

Do not delete or replace the Edge policy key unless you intend to remove every policy stored there. Back up the registry before making organization-wide changes, and get administrator approval where required.

Remove the unpacked extension instead of keeping developer mode on

You turned developer mode off, but the warning still shows up. Check whether the unpacked extension is still sitting in the Edge profile. Edge can keep the notice alive when an extension tied to developer mode remains installed.

  1. Open edge://extensions in the Edge address bar.
  2. Find the unpacked extension you want to remove.
  3. Select Remove beside that extension.
  4. Select Remove in the confirmation dialog.
  5. Close Edge, then open it again to check whether the warning is gone.

If you plan to use the extension again, keep the unpacked folder in a safe place. You can reload it later by turning on developer mode and selecting Load unpacked. If you want a store extension instead, our guide to installing Chrome Web Store extensions in Microsoft Edge covers that route.

What to do if the warning still appears

You tried the settings above, and the popup still greets you at startup. Work through these checks in order, because each one rules out a different cause.

First, close every Edge window and reopen the browser. Edge can hold the previous developer mode state until all running processes end. Then open edge://extensions and check the Developer mode toggle.

If it is on and you do not need it, turn it off. If it is off and the warning continues, remove the unpacked extension and restart Edge again.

On a managed device, open edge://policy to see whether an administrator has applied a developer mode or extension policy that conflicts with your local choice. Organization policy can override a local preference, so changing the Extensions page alone may not remove the warning.

If those checks come back clean, treat the popup as a policy issue and ask your administrator before you make more changes. For a personal PC, the practical choice is usually the one that matches your work: keep developer mode on while you test, then turn it off and remove the local extension when you are done.

Frequently Asked Questions

You may still want a clear answer on one point before you change a setting. These answers cover the common follow-ups.

How do I permanently disable the developer mode warning in Edge?

There is no standard user setting that hides the warning permanently while keeping developer mode available. Select Keep each time it appears, turn developer mode off, remove the unpacked extension, or use an administrator policy when the setting must be controlled across a managed device.

Why does the “Turn off developer mode extensions” warning keep appearing?

Edge shows the warning because developer mode is enabled, usually to support an unpacked extension. It can return after a restart until you turn developer mode off or remove the extension that needs it.

Will turning off developer mode delete my unpacked extension?

No. Turning off developer mode disables developer mode extensions, but it does not necessarily delete the unpacked extension from disk. You can remove it from edge://extensions if you no longer need it.

Does choosing Keep make Edge remember my decision?

Keep dismisses the current warning and leaves the extension available. Edge may show the notice again after a restart or when developer mode is enabled in a later session, because the prompt reflects the security state of developer mode.

Can I use Edge developer mode without showing the warning?

A managed Edge policy can control developer mode across the installation, but the normal interface has no separate switch for hiding only the warning. On a personal PC, your options are Keep or turning developer mode off.

Please share the article if you find it helpful:

Disclosure: This page may contain affiliate links, which means we may receive compensation for your purchases; of course at no extra cost to you (indeed, you may get special discounts).
Lena Vogt

Lena Vogt

Lena Vogt is a media informatics graduate. She picked Edge over Chrome after sleep tabs stopped a slow PC under too many pages. Off hours are mostly sourdough baking and bike rides when it is nice out.

Leave a thought or feedback

Please leave a descriptive comment or feedback with your real name. Our human moderator vets every comment, and it may take 24 to 48 hours to get published or rejected.
Your email address will not be published, and we will never spam your inbox. Required fields are marked *